FRITZ!Box 3370 – Service - Knowledge Base

FRITZ!Box 3370 – Service

FRITZ!Box USB remote connection displays error message "No FRITZ!Box found!"

The FRITZ!Box USB remote connection software displays the error message "No FRITZ!Box found!". This means that you cannot connect USB devices to the computer using the FRITZ!Box USB remote connection software.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

1 Setting up the USB remote connection in FRITZ!Box

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "USB Devices" in the "Home Network" menu.
  3. Click on the "USB Remote Connection" tab.
  4. Enable the USB remote connection.
  5. Specify the type of devices for which the USB remote connection should be enabled (for example "USB storage media").
  6. Click "Apply" to save your settings.

2 Connecting the computer without using guest access

You cannot use the FRITZ!Box USB remote connection software if the computer is connected with the FRITZ!Box by means of LAN guest access or wireless guest access.

Therefore, make sure that the computer is not connected with the FRITZ!Box via guest access:

3 Activating the "SSDP Discovery" service in Windows

Windows 10 / 8

  1. Press the keyboard shortcut "Windows key" + "X" and select "Control Panel" from the context menu.
  2. Click "System and Security" and then "Administrative Tools" in the "Control Panel" menu.
  3. Double-click on the entry "Services".
  4. Double-click on the entry "SSDP Discovery" displayed in the "Name" column.
  5. Select "Automatic" as the startup type.
  6. Click "OK" to save the settings.
  7. Restart your computer.

Windows 7

  1. In Windows, click "Start" and then "Control Panel".
  2. Select "Category" from the drop-down list "View by:" (top right) in the "Control Panel" menu.
  3. Click "System and Security", and then "Administrative Tools" and "Services".
  4. Double-click on the entry "SSDP Discovery" displayed in the "Name" column.
  5. Select "Automatic" as the startup type.
  6. Click "OK" to save the settings.
  7. Restart your computer.

4 Configuring your firewall for FRITZ!Box USB remote connection

A firewall on the computer with the FRITZ!Box USB remote connection can interfere with the communication between the software and the FRITZ!Box:

  • Configure an exception for the FRITZ!Box USB remote connection software in the firewall on the computer with this application,
    • or:
  • Configure the firewall so that it allows incoming and outgoing TCP and UDP connections from port 2066 on the FRITZ!Box to any destination ports on the computer.

    Note:You can find information on configuring the firewall in its manual, or consult its manufacturer directly.