FRITZ!Box 7330 – Service - Knowledge Base

FRITZ!Box 7330 – Service

Forgot password for accessing user interface

The FRITZ!Box password offers you protection from unauthorized access to your FRITZ!Box. If you forget this password, you can no longer access the FRITZ!Box's settings or functions, and you cannot login to it.

1 Sending an access link with push service mail

If you entered an e-mail address for the "forgot password" push service under "Push Service" in the "System" menu of the FRITZ!Box, you can have the FRITZ!Box send you an access link that you can then use to log into the FRITZ!Box user interface again:

  1. Open the FRITZ!Box user interface.
  2. Click "Forgot your password?" below the password request.

    Note:If the button "Send Push Service mail" is not visible, then this push service is not enabled.

  3. Click "Send Push Service Mail".
    • Now an e-mail containing a link for setting a new password is sent to the e-mail address you entered for the "forgot password" push service.
  4. Call up your e-mail with the same device you used to request the access link and follow the instructions in the e-mail.

2 Loading the FRITZ!Box factory settings

If you did not enable the "push service" in your FRITZ!Box or you cannot access the e-mail address you entered, you must load the FRITZ!Box's factory settings.

Important:When you load the factory settings, all of the settings you made in the FRITZ!Box are deleted.

However, if you previously saved your settings to a backup file, you can restore your settings after you have loaded the factory settings.

Loading the factory settings

  1. Briefly unplug the FRITZ!Box.
  2. Open the FRITZ!Box user interface within the next 10 minutes.
  3. Click "Forgot your password?" below the password request.
  4. Click the "Restore Factory Settings" button.
    • The factory settings are loaded and the FRITZ!Box is restarted.
  5. When it is finished, enter a new password and click "OK".

Restoring settings

If you saved the settings of your FRITZ!Box, then you can restore them after you have loaded the factory settings. However, do not restore FRITZ!Box users and their passwords from the backup file as otherwise you will reimport the unknown password for the user interface. Therefore, only restore selected settings:

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restore" tab.
  4. Enter the password you entered when saving the file.
  5. Click "Browse" and select the file "FRITZ.Box[...].export" with the settings you would like to restore.
  6. Enable the "restore selected settings" option.
  7. Click the "Restore" button.
  8. Enable the settings you would like to restore except for the option "FRITZ!Box user" and click "Apply".
    • The settings are now restored. When the procedure is finished, you may then have to re-register all DECT devices (such as telephones, repeaters).

      Note:All of the settings for your cordless telephones remain intact if you use the telephone's menu to register it and not the Wizard for telephony devices.

Note:Configure the "push service" so you will be able to recover your password, should you forget it again.