FRITZ!Box 7430 – Service - Knowledge Base

FRITZ!Box 7430 – Service

Connecting the FRITZ!WLAN Repeater with a FRITZ!Box using wireless LAN

Connect your FRITZ!WLAN Repeater with the FRITZ!Box in your home network over wireless LAN (WiFi) to increase the wireless range easily and efficiently.

Fig.: Connection scenario for FRITZ!WLAN Repeater

1 Using WPS to set up the wireless connection

Connect your repeater and FRITZ!Box simply and safely at the touch of a button:

  1. Plug the repeater into an outlet near the FRITZ!Box.
  2. Wait until the "Power" and "WLAN" LEDs on the repeater remain lit.
  3. Push and hold the "WPS" button on the repeater until its "WLAN" LED flashes (about 6 seconds).
  4. Within 2 minutes: Push and hold the "WLAN" button on your FRITZ!Box until its "WLAN" LED flashes (about 6 seconds).

One or more LEDs indicating signal strength remain lit on the repeater once the configuration of the wireless connection between the repeater and the FRITZ!Box has been completed. You can then unplug the repeater and plug it in wherever you want. The repeater's settings remain intact even when it is unplugged.